Investigating the mechanics of agricultural residue biomass-water mixtures flows while hydro-transporting in vertical pipesJaved K*, Vaezi M, Kumar A. Investigating the mechanics of agricultural residue biomass-water mixtures flows while hydro-transporting in vertical pipes, abstract accepted for presentation to the 2018 ASABE Annual International Meeting, July 29-Aug. 1, 2018, Detroit, Michigan, USA T01-P05 University of Alberta | Activity | 2018-04-28 | |
Can we marry pipeline transportation with hydrothermal processing?Kumar M*, Javed K, Oyedun AO, Vaezi M, Kumar A. Can we marry pipeline transportation with hydrothermal processing?, abstract submitted to the 26th European Biomass Conference & Exhibition (EUBCE 2018), May 14-18, 2018, Copenhagen, Denmark.T01-P05 University of Alberta | Activity | 2018-04-28 | Mayank Kumar, Kashif Javed, Adetoyese Oyedun, Mahdi Vaezi, Kumar, A. |
Pipeline hydro transport of wheat straw biomass in vertical pipesJaved K*, Vaezi M, Kumar A. Pipeline hydro transport of wheat straw biomass in vertical pipes, presented at the ASABE 2017 Annual International Meeting, July 16-19, 2017, Spokane, Washington.T01-P05 University of Alberta | Activity | 2017-07-19 | |
Investigating the mechanics of agricultural residue biomass-water mixtures flows while hydro-transporting in vertical pipesT01-P05 University of Alberta | Activity | 2018-07-29 | |
Techno-economic assessment of pipeline hydro-transport vs. truck delivery of forest residue biomass to a bio-based energy facility based on experimental measurementsT01-P05 University of Alberta | Activity | 2018-07-29 | |
Experimental investigation of agricultural residue biomass-water slurry flows in inclined and vertical pipelinesT01-P05 University of Alberta | Activity | 2020-07-13 | |
Comparison of vertical hydro-transport of lignocellulosic biomass with conventional solidsDate: July 7-10, 2019. [Conference Presentation].T01-P05 University of Alberta | Activity | 2019-07-07 | Kashif Javed, Mahdi Vaezi, Vinoj Kurian, Kumar, A. |
Hydrothermal liquefaction of pipelined biomass for fuel productionT01-P05 University of Alberta | Activity | 2020-11-23 | |
Raw biomass slurry flow in an inclined pipeline for its transport over a long distance to a biorefineryT01-P05 University of Alberta | Activity | 2020-07-06 | |
Experimental investigation of terminal settling velocity of biomass particles in Newtonian fluid.T01-P05 University of Alberta | Activity | 2021-07-16 | |
Hydro-transport of lignocellulosic biomass through inclined pipelines. T01-P05 University of Alberta | Activity | 2021-07-12 | |
Frictional behaviour of wheat straw-water suspensions in vertical upward flowsThe use of biofuels helps mitigate greenhouse gas emissions. Earlier studies have shown that transporting biomass in horizontal pipelines in the form of water-based slurries significantly reduces transportation costs. The frictional behaviour of water-based chopped wheat straw slurry in a vertical pipeline has not been studied and this is the focus of this study. In situ concentrations of water-based conventional solids of medium sand, glass beads, and fine sand and straw slurry flows were determined by measuring their delivered concentrations in pseudo-homogeneous regimes for prepared concentrations of 1–6% (dry volume of conventional solids) and 5–25% (saturated mass of straw), respectively. Two grades of sand and glass beads with mean particle diameters of 0.103, 0.447, and 0.5 mm, respectively, and straw with a nominal particle length of 19.2 mm were utilised. The delivered concentrations for the straw slurries and fine sand were close to their corresponding prepared concentrations and were homogeneous. There was a large discrepancy between prepared and delivered concentrations for the medium-sized sand and glass beads slurries. The pressure drop of straw slurries over the range of velocities of 0.5–4.2 m s−1 and mass concentrations of 5–25% through the vertical pipe showed a maximum drag reduction of 19% at a concentration of 25% (mass) and at a 3.5 m s−1 velocity. For concentrations of 5–20% (mass), the straw slurries showed drag-reducing capabilities in the mixed and turbulent flow regions for various velocities that were different from horizontal flows.T01-P05 University of Alberta | Publication | 2021-10-18 | Kashif Javed, Mahdi Vaezi, Vinoj Kurian, Kumar, A. |
Comparison of maize stover and wheat straw slurry flow in vertical pipesT01-P05 University of Alberta | Publication | 2022-05-01 | |
Two-phase (solid-liquid) flows of agricultural residue biomass in inclined pipes.Two-phase (solid-liquid) flows of agricultural residue biomass in inclined pipes.T01-P05 University of Alberta | Activity | 2022-07-20 | |
The development of empirical correlations to understand the frictional behavior of aqueous biomass slurry flows in vertical pipesLarge-scale biofuel production at levels equivalent to conventional oil refineries using long-distance pipeline hydro-transport of biomass can be a cleaner alternative to fossil fuels when it comes to economics and traffic congestion associated with the overland transportation of biomass. The transport of aqueous slurries of several saturated mass concentrations (5%-40%) and four-particle sizes (from <3.2-19.2 mm) of two types of agricultural residue biomass (ARB) feedstock (corn stover and wheat straw) was studied through a vertical test section of a 29 m long, 50 mm diameter closed circuit pipeline facility, and frictional pressure drops were recorded at different flow rates (0.5-4.3 m s-1). A framework was developed in RStudio (4.0.5) to analyze the experimentally obtained frictional pressure drops of biomass slurries through a multiple linear regression approach using a backward elimination method and Akaike information criterion. An empirical model was proposed to predict slurry frictional pressure drop in terms of slurry velocity, slurry solid mass concentration, particle aspect ratio, and feedstock type. The model satisfactorily predicted the frictional pressure drops of both feedstocks of biomass-water slurry flows through pipes within a 95% confidence interval. The correlations introduced for onset velocities of drag reduction in terms of slurry solid mass concentrations seemed helpful to interpret the transition points of the corresponding slurries in vertical upward flows through pipes. The empirical correlation developed in this research could help select biomass slurry pumps and pipe dimensions when designing a typical long distance pipeline network for biofuel production at the commercial level.T01-P05 University of Alberta | Publication | 2023-06-05 | |
The effect of particle size and concentration on the frictional behavior of vertical upward flows of wheat straw aqueous slurriesT01-P05 University of Alberta | Publication | 2022-09-01 | |
The Development of Empirical Correlations to Understand the Frictional Behavior of Aqueous Biomass Slurry Flows in Vertical PipesT01-P05 University of Alberta | Publication | 2023-01-01 | |
Experimental study on two-phase (solid-liquid) flows of ground wheat straw in inclined pipes Long-distance pipeline hydro-transport of lignocellulosic biomass for industrial-scale biofuel production at levels comparable to conventional oil refineries presents an economically and logistically viable alternative to fossil fuels. There is limited understanding of the behavior of the transportation of agricultural biomass slurries in an inclined pipeline. This research is focused on a laboratory-scale investigation of 6.4 mm nominal particle length (d50 = 4.85 mm) knife-milled wheat straw-water suspensions' uphill and downhill flows for a range of pipe inclination and saturated mass concentrations. The range of pipe inclination and saturated mass concentration was -7° to +21° and 5%-30%, respectively. The inclined test section was 29 m long with a 50 mm inside diameter of a closed pipeline loop. The accuracy of the measurements was verified by calibrating the inclined pipe section with fine sand (d50 = 0.103 mm)-aqueous slurries and comparing the results with established correlations. Most wheat straw-aqueous suspensions in the inclined flows showed the characteristics of the plug flow and the transition flow regions together for saturated mass concentration, Cm = 5%-30% and the entire flow range (0.5-4.7 m s-1), with a clear dependence of both the onset velocity of drag reduction (vOD) and drag reduction (%DR) on the pipe inclination as well as the slurry concentration and the critical concentration of maximum drag reduction (Cm)cr on a specific range of suspension velocity. Because of the accelerating effect of gravity, downhill slurry flows had the lowest vOD and the highest %DR at every Cm and pipe inclination with a maximum drag reduction of 25.53% at vm = 4.5 m s-1 and Cm = 25%. Uphill flows demonstrated some nonmonotonic changes in vOD and %DR, which need more experimental data for us to reach a firm conclusion. The research outcomes could help design and operate a long-distance integrated pipeline network for biomass transportation to produce biofuels on a large scale. T01-P05 University of Alberta | Publication | 2024-04-04 | |
Comparison of frictional behaviour and techno-economics of agricultural residue biomass in ascending and descending pipesThis study focuses on the techno-economic assessment of the hydro-transport of chopped agricultural and forest residue biomass by pipeline over a long distance. This could be the most sustainable and economical mode of delivering biomass for the production of biofuels on commercial scale (on par with fossil fuels). Horizontal pipeline loop arrangement has been studies earlier. However, techno-economic assessment of inclined pipeline transport of biomass slurries have not been studied earlier. This study aims at addressing this gap. A long-distance pipeline network's size and cost must be accurately estimated by comprehending and measuring the frictional behaviour and rheological characteristics of various types and sizes of materials through pipe sections at various inclinations. The main objective of the current study is to analyse the frictional behaviour of 6.4 mm particle size of wheat straw aqueous slurries as they pass through a 7.3 m long inclined pipe segment with a 50 mm diameter that is a part of a 29 m long closed-circuit pipeline facility. It will also be examined how frictional pressure drops of biomass-water slurries are impacted by pipe inclinations (both ascending and descending) in relation to the horizontal axis, slurry solid concentration, and slurry velocities. Using the findings of this study, a detailed techno-economical model for long-distance pipelines from farms to large biorefineries will be developed to estimate the cost of delivery of biomass slurries on a large scale. This information developed in this study will help in development of biorefineries on a commercial scale.
T01-P05 University of Alberta | Activity | 2023-07-09 | |
Co-processing of bio-oil and crude oil in a conventional refinery: Cost and bio-carbon content assessments for different pathwaysT13-M01 University of Alberta | Activity | 2020-02-20 | "Debarati Biswas ", Ali Alizadeh, Adetoyese Oyedun, Kumar, A. |
Assessment of co-processing hydrodeoxygenated fast pyrolysis oil and vacuum gas oil in a fluid catalytic cracking unitT13-M01 | Publication | 2020-09-09 | Ali Alizadeh |
A review of the value-added chemicals and materials from bio-based lignin feedstocks.T13-M01 University of Alberta | Publication | 2020-02-19 | |
Comparative energy and techno-economic analyses of two different configurations for hydrothermal carbonization of yard wasteT01-P05 University of Alberta | Publication | 2020-02-19 | |
Techno-economic assessment of bio-coal production through wet and dry torrefaction processes of different biomass feedstocksDate: May 27-30, 2019. [Conference Presentation]T01-P05 University of Alberta | Activity | 2019-05-27 | |
Comparative life cycle energy and greenhouse gas footprints of dry and wet torrefaction processes of various biomass feedstocks• Electricity production from dry and wet torrefied of various biomasses is studied.
• The feedstocks include wheat straw, wood chips, grape pomace manure, and algae.
• NER and GHG emissions of the life cycle of electricity generation are evaluated.
• Pathways’ GHG emissions are compared with coal- and NG-based electricity generation.T13-M01 University of Alberta | Publication | 2021-05-08 | Maryam Akbari, Adetoyese Oyedun, Eskinder Gemechu, Kumar, A. |
. Techno-economic assessment of wet and dry torrefaction of biomass feedstockT13-M01 University of Alberta | Publication | 2020-05-15 | |
The development of techno-economic model for the assessment of biorefinery for the production of bio-oil, ethanol, and hydrogenT13-M01 University of Alberta | Activity | 2021-02-26 | Temitayo Pelumi Giwa, Maryam Akbari, Kumar, A. |
Renewable natural gas (RNG) production through various production processesT13-M01 University of Alberta | Activity | 2020-11-23 | |
Comparative techno-economic assessment of renewable natural gas (RNG) production pathways from various biomass feedstocksT13-M01 University of Alberta | Activity | 2020-07-06 | |
Conversion of Organic Waste to Value-added ProductsT01-P05, T13-M01 | Publication | 2019-09-23 | Maryam Akbari |
Techno-economic Assessment of renewable natural gas (RNG) production from various thermo-chemical and biological conversion processes using biomass feedstocks. T13-M01 University of Alberta | Activity | 2021-04-27 | |
Development of techno-economic model for assessment of bio-hubs.T13-M01 University of Alberta | Activity | 2021-04-26 | Maryam Akbari, Roshni Mary Sebastian, Kumar, A. |
Development of a techno-economic model for assessment of an integrated pyrolysis and fermentation plants for production of bio-oil and ethanol. T13-M01 University of Alberta | Activity | 2021-04-26 | Temitayo Pelumi Giwa, Maryam Akbari, Kumar, A. |
Assessment of renewable aviation fuel production potential for Alberta. T01-F01 University of Alberta | Activity | 2021-05-11 | Roshni Mary Sebastian, Madhumita Patel, Maryam Akbari, Kumar, A. |
The development of data-intensive techno-economic models for the comparison of 5 biomass conversion pathways for the production of renewable natural gas. T13-M01 University of Alberta | Activity | 2021-06-28 | |
Life cycle greenhouse gas emissions assessments of an integrated biorefinery producing bio-oil, ethanol, and hydrogenT13-M01 University of Alberta | Activity | 2021-12-07 | Temitayo Pelumi Giwa, Maryam Akbari, Kumar, A. |
Assessment of the greenhouse gas emission footprint of a biorefinery over its life cycleAssessment of the greenhouse gas emission footprint of a biorefinery over its life cycleT13-M01 University of Alberta | Publication | 2022-10-17 | Temitayo Pelumi Giwa, Maryam Akbari, Kumar, A. |
Techno-economic assessment of an integrated biorefinery producing bio-oil, ethanol, and hydrogenTechno-economic assessment of an integrated biorefinery producing bio-oil, ethanol, and hydrogenT13-M01 University of Alberta | Publication | 2017-01-01 | Temitayo Pelumi Giwa, Maryam Akbari, Kumar, A. |
Lignin biorefinery products, challenges and environmental impacts: A comprehensive reviewLignin biorefinery products, challenges and environmental impacts: A comprehensive reviewT13-M01 University of Alberta | Publication | 2017-01-01 | |
The development of data-intensive techno-economic models for the comparison of renewable natural gas production from six different biomass feedstocks for the decarbonization of energy demand sectors(Under review as of May 2023)
The development of data-intensive techno-economic models for the comparison of renewable natural gas production from six different biomass feedstocks for the decarbonization of energy demand sectorsT13-M01 University of Alberta | Publication | 2023-04-11 | |
Assessment of bio-jet fuel production from alcoholsAssessment of bio-jet fuel production from alcohols. NSERC/Cenovus/Alberta Innovates Associate Industrial Research Chair in Energy and Environmental Systems Engineering TAC MeetingT13-M01 University of Alberta | Activity | 2022-11-30 | "Dwivedi A ", "Nayan N ", Maryam Akbari, Kumar, A. |
Assessment of bio-jet fuel production from alcoholsAssessment of bio-jet fuel production from alcoholsT13-M01 University of Alberta | Activity | 2022-10-26 | "Nayan N ", "Dwivedi A ", Maryam Akbari, Kumar, A. |
A consequential life cycle assessment of biofuel production on transportation sectorJuly 7-10, 2019. [Conference Presentation]T01-P05 University of Alberta | Activity | 2019-07-07 | |
Development of Methodological Framework and its Application for Life Cycle Assessment of Renewable Fuels for TransportationT13-M01 | Publication | 2019-07-25 | Nafisa Mahbub |
The life cycle greenhouse gas emission benefits from alternative uses of biofuel coproductsT13-M01 University of Alberta | Publication | 2019-08-30 | Nafisa Mahbub, Eskinder Gemechu, "H Zhang ", Kumar, A. |
Life cycle assessment of a battery electric vehicle and a hydrogen fuel cell vehicle: The impact of driving pattern and climatic conditions on environmental performanceLife cycle assessment of a battery electric vehicle and a hydrogen fuel cell vehicle: The impact of driving pattern and climatic conditions on environmental performanceT13-P04 University of Alberta | Publication | 2017-01-01 | Dipankar Khanna, Eskinder Gemechu, Kumar, A., Nafisa Mahbub |
How to model a complex national energy system? Developing an integrated energy systems framework for long-term energy and emissions analysisT13-P01, T13-M01 University of Alberta | Publication | 2019-04-23 | |
The Development of a Technology-Explicit Bottom-Up Integrated Multi-Regional Energy Model of CanadaThe Development of a Technology-Explicit Bottom-Up Integrated Multi-Regional Energy Model of Canada, MSc Thesis, University of Alberta, Department of Mechanical Engineering, 2017.T13-P01 | Publication | 2017-09-14 | Matthew Davis |
Development of disaggregated energy use and greenhouse gas emission footprints in Canada's iron, gold, and potash mining sectorsDevelopment of disaggregated energy use and greenhouse gas emission footprints in Canada's iron, gold, and potash mining sectors, Resources, Conservation and Recycling, 2020, 152: 104485. T13-P01 University of Alberta | Publication | 2019-10-05 | |
Assessment of greenhouse gas mitigation options for the iron, gold, and potash mining sectorsKatta AK, Davis M, Kumar A. Assessment of greenhouse gas mitigation options for the iron, gold, and potash mining sectors, Journal of Cleaner Production, 2019 (in press).T13-P01 University of Alberta | Publication | 2019-10-08 | |
Evaluating long-term greenhouse gas mitigation opportunities through carbon capture, utilization, and storage in the oil sandsT13-M01 University of Alberta | Publication | 2020-10-15 | |
An assessment of opportunities for cogenerating electricity to reduce greenhouse gas emissions in the oil sandsT13-M01 University of Alberta | Publication | 2020-02-19 | |
Greenhouse gas emission abatement potential and associated costs of integrating renewable and low carbon energy technologies into the Canadian oil sandsT13-M01 University of Alberta | Publication | 2020-11-01 | |
Development of long-term GHG mitigation options for the Canadian oil sandsT13-M01 University of Alberta | Activity | 2020-02-20 | Ryan Janzen, Matthew Davis, Kumar, A., Eskinder Gemechu, Olufemi Oni |
Long-range Energy Alternatives Planning System - Application to Canada.T13-M01 University of Alberta | Activity | 2020-02-20 | |
Long-term evaluation of carbon capture and low-carbon energy technologies in the oil sandsT13-M01 University of Alberta | Activity | 2019-07-23 | |
A look into Canada’s future electricity grid greenhouse gas emissions factorsT13-M02 University of Alberta | Activity | 2019-07-23 | Matthew Davis, Ankit Gupta, "Muhammad Ahiduzzaman ", Kumar, A. |
Assessment of greenhouse gas reduction options for Canada’s iron, gold, and potash mining sectors. T13-M01 University of Alberta | Activity | 2019-07-23 | |
Assessing the potential impact and cost of using low carbon energy technologies for reducing greenhouse gas emissions in the oil sandsJune 3-4, 2019. [Conference Presentation]T13-M01 University of Alberta | Activity | 2019-06-03 | |
Assessing the impacts and costs of using low carbon energy technologies to reduce greenhouse gas emissions in the oil sandsT13-M01 University of Alberta | Activity | 2019-05-07 | |
An integrated assessment framework for the decarbonization of the electricity generation sectorT13-P01, T13-M02 University of Alberta | Publication | 2021-04-15 | |
Oil’s cost on water: bottom up modelling of Canada’s oil and gas sector water use and the effect of commodity priceT13-P01 University of Alberta | Activity | 2020-11-23 | Thomas Edward Lamont Patrick, Matthew Davis, Ankit Gupta, Kumar, A. |
Water-use implications of low-carbon pathways in the oil and gas sectorT13-P01 University of Alberta | Activity | 2020-11-09 | Thomas Edward Lamont Patrick, Matthew Davis, Kumar, A. |
Assessing present and future water flows in Canada with a focus on the energy supply sectorsAbstract accepted for presentation at CWRA 2020, June 15-18, 2020, Winnipeg, Canada. (conference cancelled due to COVID-19).T13-P01 University of Alberta | Activity | 2020-06-15 | Thomas Edward Lamont Patrick, Matthew Davis, Kumar, A. |
Water-use implications of low carbon pathways in the oil and gas sectorNov 3-6, 2019. [Conference Presentation]T13-P01 University of Alberta | Activity | 2019-11-04 | Thomas Edward Lamont Patrick, Matthew Davis, Kumar, A. |
A framework to identify marginal electricity production technologies for consequential life cycle assessment: A case study of the electricity sector • A novel framework was developed to identify long-term marginal energy suppliers.
• 9 scenarios were formulated to assess the effects of policy decisions on the energy system.
• Wind energy generation shows significant penetration in all scenarios.
• Renewable energy penetration could lower the grid emissions up to 74.6 kg CO2 eq/MWh.
• Combined cycle and wind are the long-term marginal suppliers in Alberta’s grid transition.T13-C01 University of Alberta | Publication | 2021-07-15 | Tanveer Mehedi, Eskinder Gemechu, Matthew Davis, Kumar, A. |
Achieving net-zero greenhouse gas emissions in Canada by 2050 what does it mean?T13-M01 University of Alberta | Activity | 2021-02-26 | |
Water-use implications of low carbon pathways in the oil and gas sectorT13-P01 University of Alberta | Activity | 2021-02-26 | Thomas Edward Lamont Patrick, Matthew Davis, Kumar, A. |
Developing a framework to assess the long-term environmental consequences of the transition to cleaner electricity generation: the case of AlbertaT13-M01, T13-M02 University of Alberta | Activity | 2020-11-23 | Matthew Davis, Tanveer Mehedi, Eskinder Gemechu, Kumar, A. |
LEAP Canada: Pulp and paper energy and GHG analysisT13-M01 University of Alberta | Activity | 2020-08-31 | |
Technical potential of hydrogen and GHG emission in its transportation through natural gas pipelinesT13-M01 University of Alberta | Activity | 2020-07-30 | Ayodeji Oluwalonimi Okunlola, Giovanni DiLullo, Matthew Davis, Olufemi Oni, Kumar, A. |
Development of energy efficiency cost curves: pulp & paper and iron & steel sectorsT13-M01 University of Alberta | Activity | 2020-05-11 | Christophe Owttrim, Saeidreza Radpour, Matthew Davis, Kumar, A. |
Assessment of renewable energy transition pathways for a fossil fuel-dependent electricity-producing jurisdictionT13-M02 University of Alberta | Publication | 2020-11-19 | Matthew Davis, "Adeoye Moronkeji ", "Md Ahiduzzaman ", Kumar, A. |
Quantitative Assessment of GHG and Water Footprints for Energy Scenarios. T13-M02 University of Alberta | Activity | 2020-11-23 | |
Assessing decarbonization of the electricity supply sector through comprehensive integrated scenario analysis. T13-M01 University of Alberta | Activity | 2021-05-17 | |
Green hydrogen production in Canada for export to Europe – An assessment of technical potential.T13-M01 University of Alberta | Activity | 2021-05-17 | Ayodeji Oluwalonimi Okunlola, Matthew Davis, Kumar, A. |
Development of long-term forecasting model to assess current and future water flows in Canada for energy supply sectors. T13-P01 | Activity | 2021-05-31 | Thomas Edward Lamont Patrick, Matthew Davis |
A decarbonization assessment of Canada’s electricity generation sector. T13-M01 University of Alberta | Activity | 2021-06-04 | |
The development of data-intensive models for the estimation of GHG intensity, cost and market shares of vehicles in the passenger and freight transportation sectors by 2050T13-M01 University of Alberta | Activity | 2021-06-28 | |
Projections of cost of ownership; GHG intensity; and market share of vehicles in the passenger and freight transportation sectors. T13-M01 University of Alberta | Activity | 2021-09-20 | |
A decarbonization assessment of Canada's electricity generation sector. T13-M01, T13-M02 University of Alberta | Activity | 2021-09-20 | |
Water-use implications of low-carbon pathways in the oil sands. T13-P01 University of Alberta | Activity | 2021-09-20 | Thomas Edward Lamont Patrick, Matthew Davis, Kumar, A. |
Long-term energy transition in road transportation by 2050: a system-wide cost, market share, and greenhouse gas emission comparison of conventional, battery electric and hydrogen fuel-cell vehicles. T13-C01 University of Alberta | Activity | 2021-11-29 | |
Development of a bottom-up framework to determine energy efficiency contribution potential of more than 100 measures for meeting national net-zero GHG emissions. T13-M01 University of Alberta | Activity | 2021-11-29 | |
Assessing the cost competitiveness of electrolytic hydrogen production from small modular nuclear power plants. T13-M01 University of Alberta | Activity | 2021-12-07 | Ayodeji Oluwalonimi Okunlola, Matthew Davis, Kumar, A. |
Analysis of Canada’s water use: Tracing water flow from source to end useThis study provides estimates for disaggregated water use by regional subsectors and uses Sankey diagrams to depict the water flow from the intake to consumption and discharge. The study uses a bottom-up method in the oil and gas and hydropower sectors and top-down methods in the residential, commercial and institutional, manufacturing, mining, agricultural, and power sectors. Surface and groundwater are considered separately. Water use in the year 2017 was analyzed for British Columbia, Alberta, Saskatchewan, Manitoba, Ontario, Quebec, the Atlantic Provinces, and the Territories. Water-use intensities were also calculated by region and sector. A total of 40 billion m3 of water use is traced from source to either discharge or consumption. New disaggregated data is developed provincially and by sector for oil and gas, mining, and power generation. Water use in the oil and gas sector was disaggregated into 5 subsectors, with oil sands surface mining in Alberta as the largest consumer with 138 million m3 of water consumed. Hydropower was estimated to consume the most water out of all sectors, with 3393 million m3 of water consumed. Alberta was also found to have the largest consumptive water use per capita.T13-P01 University of Alberta | Publication | 2021-11-09 | "Nikhil Agrawal ", Thomas Edward Lamont Patrick, Matthew Davis, "Ahiduzzaman M ", Kumar, A. |
Assessment of greenhouse gas abatement scenarios for the pulp and paper sectorT13-M01 University of Alberta | Activity | 2021-12-07 | |
Achieving net-zero greenhouse gas emissions in Canada by 2050 – what does it mean? T13-M01 University of Alberta | Activity | 2021-05-17 | |
The technical and economic potential for improving energy efficiency in the Canadian pulp and paper sector. T13-M01 University of Alberta | Activity | 2021-06-28 | |
Developing a techno-economic model to evaluate the cost performance of a zeolite 13X-based space heating systemA zeolite-based heating system charged with air solar collectors was designed.
A techno-economic model of the zeolite 13X space heating system was developed to estimate the storage cost.
The levelized cost of energy storage is $0.06 per kWh over a 20-year lifespan.
The estimated capital cost scale factor of the zeolite-based space heating system is 0.761.
Sensitivity analysis suggests that zeolite pellet diameter is one of the key inputs affecting the design and the cost.T13-P04 University of Alberta | Publication | 2021-09-06 | Ngoc Khanh Thy Tran, Olufemi Oni, Eskinder Gemechu, Matthew Davis, Kumar, A. |
Development of technology-explicit energy saving bandwidths: a case study for the pulp and paper sector• Novel method to estimate the total technical potential for improving energy efficiency.
• Bottom-up sector energy model used to characterize energy demands and opportunities.
• Technology-explicit analysis framework used to estimate integrated energy savings.
• Application to Canada’s pulp & paper sector indicates major savings are possible.
• Technical potential to reduce natural gas use by 95% and net electricity by 54%T13-M01 University of Alberta | Publication | 2022-04-07 | |
Techno-economic assessment of low-carbon hydrogen export from Western Canada to Eastern Canada, the USA, the Asia-Pacific, and Europe• The supply chain cost of H2 export from Alberta to viable destinations is assessed.
• Exporting H2 to the USA with new long-distance hydrogen pipelines costs 4.81/kg.
• Exporting hythane to the USA can reduce H2 delivered cost to $4.03/kg.
• Exporting H2 to Asia-Pacific and Europe costs $6.65/kg and $8.18/kg, respectively.
• Exporting ammonia can reduce the overseas H2 delivered cost by over 25%.T13-M01 University of Alberta | Publication | 2022-01-06 | Ayodeji Oluwalonimi Okunlola, Temitayo Pelumi Giwa, Giovanni DiLullo, Matthew Davis, Eskinder Gemechu, Kumar, A. |
The development of a framework to assess long-term water supply and demand projections for integrated assessment of environment impacts for the energy sectorT13-P01 University of Alberta | Publication | 2022-05-01 | "Anum Dar ", Thomas Edward Lamont Patrick, Matthew Davis, Mohammed A H Mondal, Kumar, A. |
The greenhouse gas reduction potential and cost-effectiveness of economy-wide hydrogen-natural gas blending for energy end usesThe greenhouse gas reduction potential and cost-effectiveness of economy-wide hydrogen-natural gas blending for energy end usesT13-M01 University of Alberta | Publication | 2022-11-08 | Matthew Davis, Ayodeji Oluwalonimi Okunlola, Giovanni DiLullo, Temitayo Pelumi Giwa, Kumar, A. |
The development of a GIS-based framework to assess the technical hydrogen production potential from wind and solar energyThe development of a GIS-based framework to assess the technical hydrogen production potential from wind and solar energyT13-P04 University of Alberta | Publication | 2022-06-04 | Ayodeji Oluwalonimi Okunlola, Matthew Davis, Kumar, A. |
Energy efficiency as a critical resource to achieve carbon neutrality in pulp and paper sectorEnergy efficiency as a critical resource to achieve carbon neutrality in pulp and paper sectorT13-M01 University of Alberta | Publication | 2022-05-05 | Christophe Owttrim, Matthew Davis, H U Shafique, Kumar, A. |
The development of techno-economic models for the assessment of low-carbon hydrogen export from Western Canada to Eastern Canada, the USA, the Asia-Pacific, and EuropeThe development of techno-economic models for the assessment of low-carbon hydrogen export from Western Canada to Eastern Canada, the USA, the Asia-Pacific, and EuropeT13-M01 University of Alberta | Publication | 2017-01-01 | Ayodeji Oluwalonimi Okunlola, Temitayo Pelumi Giwa, Giovanni DiLullo, Matthew Davis, Eskinder Gemechu, Kumar, A. |
Assessing the cost competitiveness of electrolytic hydrogen production from small modular nuclear reactor-based power plants: a price-following perspectiveAssessing the cost competitiveness of electrolytic hydrogen production from small modular nuclear reactor-based power plants: a price-following perspectiveT13-P04 University of Alberta | Publication | 2023-04-11 | Ayodeji Oluwalonimi Okunlola, Matthew Davis, Kumar, A. |
A novel technology-explicit framework for predicting the efficiency of industrial device retrofits in stock turnover models for the pulp and paper sector(Under review as of May 2023)
A novel technology-explicit framework for predicting the efficiency of industrial device retrofits in stock turnover models for the pulp and paper sectorT13-M01 University of Alberta | Publication | 2023-04-11 | |
Long-term integrated assessment of water and GHG impacts of a transition to low-carbon unconventional oil extraction.Long-term integrated assessment of water and GHG impacts of a transition to low-carbon unconventional oil extraction. NSERC/Cenovus/Alberta Innovates Associate Industrial Research Chair in Energy and Environmental Systems Engineering TAC MeetingT13-P01 University of Alberta | Activity | 2022-11-30 | Gustavo Moraes Coraca, Kumar, A., Matthew Davis |
Net-zero pathways for cement sectorT13-M01 University of Alberta | Activity | 2022-08-11 | |
Assessing the value of electrolytic hydrogen in power sectors for reversible gas-to-power conversion and emissions reductionAssessing the value of electrolytic hydrogen in power sectors for reversible gas-to-power conversion and emissions reductionT13-M01 University of Alberta | Activity | 2022-08-11 | Ayodeji Oluwalonimi Okunlola, Matthew Davis, Kumar, A. |
Assessment of decarbonizing the road transportation sector using low carbon fuelsAssessment of decarbonizing the road transportation sector using low carbon fuelsT13-M01 University of Alberta | Activity | 2022-08-11 | |
Development of an economy-wide decarbonization assessment framework for an emission intensive and a net energy exporting jurisdiction.Development of an economy-wide decarbonization assessment framework for an emission intensive and a net energy exporting jurisdiction.T13-M01 University of Alberta | Activity | 2022-08-11 | |
Can low-carbon hydrogen from Canada be competitive in international markets?Can low-carbon hydrogen from Canada be competitive in international markets?T13-M01 University of Alberta | Activity | 2022-06-04 | Ayodeji Oluwalonimi Okunlola, Temitayo Pelumi Giwa, Giovanni DiLullo, Matthew Davis, Eskinder Gemechu, Kumar, A. |
Decarbonization of the electricity supply sector through development of energy systems model.Decarbonization of the electricity supply sector through development of energy systems model.T13-M01 University of Alberta | Activity | 2022-05-25 | |
Assessing the value of electrolytic hydrogen in power sectors for reversible gas-to-power conversion and emissions reduction.Assessing the value of electrolytic hydrogen in power sectors for reversible gas-to-power conversion and emissions reduction.T13-M01 University of Alberta | Activity | 2022-05-25 | Ayodeji Oluwalonimi Okunlola, Matthew Davis, Kumar, A. |
Is there a value for low carbon hydrogen exports from Alberta, Canada in international markets?Is there a value for low carbon hydrogen exports from Alberta, Canada in international markets?T13-M01 University of Alberta | Activity | 2022-04-27 | Ayodeji Oluwalonimi Okunlola, Temitayo Pelumi Giwa, Giovanni DiLullo, Matthew Davis, Eskinder Gemechu, Kumar, A. |
Comparative cost and greenhouse gas emission assessment of land-based hydrogen transportation systems.Comparative cost and greenhouse gas emission assessment of land-based hydrogen transportation systems.T13-M01 University of Alberta | Activity | 2022-04-27 | Temitayo Pelumi Giwa, Giovanni DiLullo, Ayodeji Oluwalonimi Okunlola, Matthew Davis, Tanveer Mehedi, Olufemi Oni, Kumar, A. |
How effective is hydrogen-natural gas blending at reducing greenhouse gas emissions?How effective is hydrogen-natural gas blending at reducing greenhouse gas emissions?T13-M01 University of Alberta | Activity | 2022-04-27 | Ayodeji Oluwalonimi Okunlola, Matthew Davis, Temitayo Pelumi Giwa, Giovanni DiLullo, Kumar, A. |
Greenhouse gas intensity and share of low-carbon technology vehicles in 2050.Greenhouse gas intensity and share of low-carbon technology vehicles in 2050.T13-M01 University of Alberta | Activity | 2022-04-26 | |
Technology-based Options for Achieving Net-zero GHG Emissions in CanadaWe have developed a framework for accounting and assessing technology-specific measures toward achieving net-zero GHG emissions within a multi-regional multi-sectoral economy based on a bottom-up energy model featuring high technological detail. This framework allows for system-wide effects and costs to be assessed incrementally and can facilitate regional decarbonization policy development. This framework indicates the gaps between currently available technologies and GHG emissions goals; other approaches may blur the line between current and aspirational technologies.
We used this framework to perform a case study for Canada, where we established a portfolio of 184 measures based on a thorough review, and, after categorizing them according to type and technological readiness, evaluated their economic and environmental performance. We compared the effects of these measures to static reference and business-as-usual scenarios reflective of current policy. Together, the assessed measures represent an extensive portfolio of commercially available opportunities for energy efficiency improvement, fuel-switching, and carbon capture and storage. The results show the magnitude of the gaps between national GHG reduction ambitions and currently available solutions and highlight the need for more transparent and credible approaches to economy-wide decarbonization assessment.
T13-P01 University of Alberta | Activity | 2023-06-03 | |
Evaluation of using Alberta hydrogen for clean-firm power in decarbonized power gridsWe evaluated the role that hydrogen can play in achieving a decarbonized power grid. Seventy-two scenarios were explored, and we assessed the greenhouse gas reduction potential of these scenarios, as well as their costs. Our research demonstrates that hydrogen for clean, firm power can effectively provide clean electricity and reduce emissions. However, the source of hydrogen is critical to achieving GHG reductions in the province. We also found that using hydrogen for clean, firm power can create economic benefits, such as investment in infrastructure and jobs. However, this could lead to unwanted increases in electricity prices. Blue hydrogen-based power is not economical in a grid-like we have today, but it can be a competitive option in a nearly decarbonized grid, but only if fueled by ATR with CCS. Finally, hydrogen in the power sector is just one option to reduce emissions. Out of the options assessed in our group, other options are available at lower costs that provide deeper emission cuts, and these should be compared before making decisions.T13-P01 University of Alberta | Activity | 2023-04-25 | |
A strategy assessment to decarbonize road transport in AlbertaThe objective of this work is to contribute to finding answers to key questions for the decarbonization of road transport in Alberta. These questions are: 1) What is the GHG mitigation potential of hydrogen vehicles? 2) What’s the market share of hydrogen vehicles in different sectors? 3) What is the impact of policies like carbon price, zero-emission vehicles (ZEVs) sales mandate, and incentivization? Our study found that the ZEV sales mandate is the most effective way of transitioning the road transportation sector to ZEVs. The market shares of battery electric vehicles (BEVs) were found to be highest in 2050. Carbon price and incentivization do not have a significant effect on the cost or market share of ZEVs and in decreasing energy demand and GHG emissions. The emission factors of H2-FCEV ATR with 91% carbon capture are lowest at lower carbon prices. The carbon price scenarios have the most significant impact of all the scenarios on social costs.T13-P04 University of Alberta | Activity | 2023-04-26 | |
Development of a framework to assess the greenhouse gas mitigation potential from the adoption of low-carbon road vehicles in a hydrocarbon-rich regionThis study developed a novel assessment framework to analyze long-term energy transition in the road transport sector in which various technology options, market shares, policy measures, costs, and greenhouse gas emissions are considered in a single framework analysis. A data-intensive model was developed with the Low Emissions Analysis Platform (LEAP) and used to analyze policy scenarios up to 2050 for Alberta, Canada, a hydrocarbon-rich province with an emission-intensive energy sector. Three key policy measures – carbon pricing, zero-emission vehicle sales mandate, and incentivization – were analyzed in nine individual and combined policy scenarios. The transition to both hydrogen fuel cell electric vehicles and battery electric vehicles was assessed for
all vehicle categories. Each fuel’s full energy supply chain was modeled, including resource extraction, conversion, transmission and distribution, and fuelling, allowing for final and primary energy analysis. The findings show that carbon price and zero-emission vehicle incentives do not effectively lower greenhouse gas emissions on their own; zero-emission vehicle mandates are needed to transition the sector to a low-carbon energy system. The system-wide greenhouse gas emission footprints of hydrogen and battery electric vehicles are significantly below conventional vehicles in all cases. Scenarios biased towards battery electric vehicles had the most favorable results. The greenhouse gas emission footprint of hydrogen vehicles supplied by auto-thermal
reforming with 91% carbon capture was lower than for battery electric vehicles powered by a primarily natural gas-based power grid. The findings on the effectiveness of carbon prices, incentives, and vehicle mandates should be considered by government policymakers aiming to reduce greenhouse gas emissions, infrastructure planners, and other energy stakeholders.T13-P04 University of Alberta | Publication | 2024-01-12 | |
Assessments of technologies developed under future energy systemsT13-P04 University of Alberta | Activity | 2018-10-03 | |
How to assess the life cycle sustainability of technologies for future energy system?T13-P04 University of Alberta | Activity | 2018-09-25 | |
Life cycle assessment of greenhouse gas emissions of upgrading and refining bitumen from the solvent extraction processT13-M01 University of Alberta | Publication | 2019-04-23 | Mohammad Ikthair Hossain Soiket, Olufemi Oni, Eskinder Gemechu, Kumar, A. |
The development of net energy ratio and life cycle assessment of large-scale energy storage systemsT13-M01 University of Alberta | Publication | 2018-12-26 | "Sahil Kapila ", Olufemi Oni, Eskinder Gemechu, Kumar, A. |
Life cycle assessment of energy systems transitionT13-C01 University of Alberta | Activity | 2019-03-21 | Tanveer Mehedi, Alex Bradley, Eskinder Gemechu, Joule Bergerson, Kumar, A. |
Life cycle assessment of energy systems transitionT13-C01 University of Alberta | Activity | 2018-10-03 | Tanveer Mehedi, Eskinder Gemechu, Kumar, A., Alex Bradley, Joule Bergerson |
Chapter 12: The environmental performance of hydrogen production pathways based on renewable sourcesT13-M01 University of Alberta | Publication | 2020-02-13 | |
Life cycle assessment to evaluate environmental performance of thermochemical processing of biomassT01-P05 University of Alberta | Publication | 2020-02-19 | Eskinder Gemechu, Adetoyese Oyedun, Edson Nogueira Jr, Kumar, A. |
Developing a greenhouse gas life cycle assessment framework for natural gas transmission pipelinesT13-M01 University of Alberta | Publication | 2020-02-19 | Giovanni DiLullo, Olufemi Oni, Eskinder Gemechu, Kumar, A. |
Key factors affecting greenhouse gas emissions in Canada’s industrial sector: A decomposition analysisT13-M01 University of Alberta | Publication | 2020-02-19 | |
Evaluating energy and greenhouse gas emission footprints of thermal energy storage systems for concentrated solar power applicationsT13-M01 University of Alberta | Publication | 2020-02-19 | "Spandan Thaker ", Olufemi Oni, Eskinder Gemechu, Kumar, A. |
Extending sensitivity analysis using regression to effectively disseminate life cycle assessment resultsT13-M01 University of Alberta | Publication | 2020-02-19 | Giovanni DiLullo, Eskinder Gemechu, Olufemi Oni, Kumar, A. |
Evaluation of energy and greenhouse gas emissions of bitumen-derived fuels from toe-to-heel air injection extraction technologyT13-M01 University of Alberta | Publication | 2020-02-19 | Mohsen Safaei, Olufemi Oni, Eskinder Gemechu, Kumar, A. |
Evaluation of energy and GHG emissions’ footprints of bitumen extraction using Enhanced Solvent Extraction Incorporating Electromagnetic heating technologyT13-M01 University of Alberta | Publication | 2020-02-19 | Mohsen Safaei, Olufemi Oni, Eskinder Gemechu, Kumar, A. |
Assessment of energy storage technologies: a literature review; formerly Techno-economic and life cycle assessments of electrical energy storage technologies: a literature reviewT13-M01 University of Alberta | Publication | 2020-02-19 | |
Development of rigorous refining model simulation models to determine the greenhouse gas emission impact of Canadian crude oil blends in a refineryNov 11-15, 2019. [Conference Presentation]T13-M01 University of Alberta | Activity | 2019-11-11 | |
Application of artificial intelligence to estimate life cycle GHG emissions in the production of transportation fuels from bitumenT13-M01 University of Alberta | Activity | 2020-02-20 | Giovanni DiLullo, Eskinder Gemechu, Olufemi Oni, Kumar, A. |
Development of techno-economic and greenhouse gas emissions models for the assessment of valuable metals recovery from the oil sandsT13-M01 University of Alberta | Activity | 2019-07-23 | "Miguel Barritto ", Olufemi Oni, Eskinder Gemechu, Kumar, A. |
Life cycle assessment of mono-crystalline TiO2 nanorod array based halide perovskite solar cellsT12-P02, T13-P04 University of Alberta | Activity | 2019-05-07 | |
Life cycle assessment of energy system transitionsT13-C01 University of Alberta | Activity | 2019-05-07 | |
Life Cycle Assessment of Monocrystalline TiO2 Nanorod Array Based Halide Perovskite Solar CellsT13-P04 University of Alberta | Activity | 2020-05-10 | |
Renewable-Energy-Driven Future: Technologies, Applications, Sustainability and PoliciesT13-M01 University of Alberta | Publication | 2021-05-13 | |
Development of a framework for the assessment of the market penetration of novel in situ bitumen extraction technologiesGreenhouse gas (GHG) mitigation opportunities from emerging in situ mining technologies in oil sands production can play a role in reducing global warming. There is limited research on quantitative assessments of the penetration of emerging oil sands technology in the energy sector. This study addresses this gap by developing a novel framework (MAPL-OET) to assess the market penetration of emerging oil sand extraction technologies. The framework is robust and data-intensive as it combines diffusion models, econometrics models, cost models, and energy-economy equilibrium models. The combined model evaluates the adoption of new energy technologies resulting from carbon price measures and other economic factors, as well as the GHG mitigation potential in the oil sands sector. T13-M01 University of Alberta | Publication | 2020-12-19 | Saeidreza Radpour, Eskinder Gemechu, "Md Ahiduzzaman ", Kumar, A. |
Life cycle greenhouse gas emissions and energy footprints of utility-scale solar energy systems T13-C01 University of Alberta | Publication | 2022-03-25 | |
Techno-economic assessment of titanium dioxide nanorod-based perovskite solar cells: from lab-scale to large-scale manufacturing Perovskite solar cells (PSCs) have shown remarkable progress in recent years. Different materials and structures have been developed to improve the photoconversion efficiency and operational stability of PSCs. However, the economic and technical impacts of materials and design choice on the large-scale deployment are not well addressed in the literature. In this research, a pathway for producing titanium dioxide (TiO2) nanorod-based perovskite solar modules was established and their manufacturing cost was estimated through the development of data-intensive, bottom-up techno-economic models. Material, utilities, and equipment requirements from available laboratory data to a mass production annual capacity of up to 21 MW were estimated through the development of scale factors. The minimum sustainable price and levelized cost of electricity were calculated. The direct manufacturing cost of the reference PSC module was estimated at $80.23/m2 and $0.73/W with a production capacity of 3.5 MWp. These costs decline to $47.15/m2 and $0.43/W at 21 MW production capacity. Material costs dominate the overall costs, fluorine-doped tin oxide glass being the most expensive material. The perovskite solar cell panels, when installed in residential homes in Alberta, Canada, were calculated to have a competitive levelized cost of electricity ranging from 7 to 17 cents per kWh. However, the cost was found to be extremely sensitive to the module efficiency, lifetime, and the solar insolation at the location of installation.T12-P02, T13-P04 University of Alberta | Publication | 2021-06-18 | |
Developing a framework to assess the long-term adoption of renewable energy technologies in the electric power sector: the effects of carbon price and economic incentivesT13-M01 University of Alberta | Publication | 2020-08-03 | Saeidreza Radpour, Eskinder Gemechu, "Ahiduzzaman M ", Kumar, A. |
A survey of how practitioners implement sensitivity and uncertainty analysis in life cycle assessmentsT13-M01 University of Alberta | Publication | 2020-10-01 | Giovanni DiLullo, Eskinder Gemechu, Olufemi Oni, Kumar, A. |
The environmental performances of alternative materials for hydrogen production via photocatalytic water splittingT13-P04 University of Alberta | Activity | 2020-12-01 | Jayranjan Maurya, Eskinder Gemechu, Kumar, A. |
The life cycle energy and environmental footprints of high-performance monocrystalline titanium dioxide nanorod-base perovskite solar cellsT12-P02, T13-P04 University of Alberta | Activity | 2020-11-23 | |
Development of life cycle GHG emissions of high-performance mono-crystalline titanium dioxide nanorod based perovskite solar cellsT12-P02, T13-P04 University of Alberta | Activity | 2020-10-14 | Harshadeep Kukkikatte Ramamurthy Rao, Eskinder Gemechu, Ujwal Thakur, Shankar, K. |
Life cycle assessment of high-performance mono-crystalline titanium dioxide nanorod based perovskite solar cellsT12-P02, T13-P04 University of Alberta | Activity | 2020-09-22 | |
The development of a techno-economic model for the assessment of the cost of flywheel energy storage systems for utility-scale stationary applications
• A techno-economic assessment was performed for flywheel storage systems.
• A bottom-up cost model was developed to assess the levelized cost of flywheel storage.
• Composite and steel rotor flywheels were assessed for frequency regulation.
• The steel rotor flywheel has a lower capital cost and levelized cost of storage.
• The costs of composite and steel rotor flywheels are $190 and $146/MWh, respectively.T13-P04 University of Alberta | Publication | 2021-06-15 | M M Rahman, Eskinder Gemechu, Olufemi Oni, Kumar, A. |
The greenhouse gas emissions’ footprint and net energy ratio of utility-scale electro-chemical energy storage systems• Bottom-up life cycle assessment models were developed for battery storage systems.
• Life cycle greenhouse gas (GHG) emissions of five battery storage systems were evaluated.
• Four different stationary applications of batteries were examined.
• The Li-ion has the highest net energy ratio (NER) and lowest GHGs in all applications.T13-C01 University of Alberta | Publication | 2021-07-12 | M M Rahman, Eskinder Gemechu, Olufemi Oni, Kumar, A. |
Life cycle assessment of high-performance monocrystalline titanium dioxide nanorod-based perovskite solar cellsT12-P02, T13-P04 University of Alberta | Publication | 2021-07-23 | |
Greenhouse gas emissions from Canadian oil sands supply chains to ChinaThe main purpose of this study is to develop a bottom-up life cycle assessment model to evaluate the greenhouse gas (GHG) emissions associated with the Canadian oil sands supply to China. Two pathways were considered. In pathway I, extracted bitumen is sent to Edmonton for upgrading and pipelined to the Westridge terminal near Vancouver, then shipped to a port in China. In pathway II, extracted bitumen is mixed with diluent, directly pipelined to the Westridge terminal, and shipped to China. The results from both the pipeline and the shipping models suggest that pathway I has better GHG emissions than pathway II on a per-barrel basis. T13-M01 University of Alberta | Publication | 2022-04-04 | Krishna Sapkota, Eskinder Gemechu, Olufemi Oni, "Linwei M. ", Kumar, A. |
Life cycle environmental and techno-economic assessment of perovskite solar cells. T12-P02, T13-P04 University of Alberta | Activity | 2021-07-16 | |
Transition to cleaner grid for fossil fuel dominant jurisdictions: Development of a consequential lifecycle assessment approach. T13-C01 University of Alberta | Activity | 2021-09-20 | |
The techno-economic assessment of alternative materials for hydrogen production via photocatalytic water splitting. T13-P04 University of Alberta | Activity | 2021-09-20 | Jayranjan Maurya, Eskinder Gemechu, Kumar, A. |
The techno-economic assessment of alternative materials for hydrogen production via photocatalytic water splitting. T13-P04 University of Alberta | Activity | 2021-11-29 | Jayranjan Maurya, Eskinder Gemechu, Kumar, A. |
Assessment of environmental and energy footprints of utility-scale flywheel energy storage systems. T13-P04 University of Alberta | Activity | 2021-11-29 | "Rahman Mustafizur ", Eskinder Gemechu, Olufemi Oni, Kumar, A. |
Life cycle assessment of an electric vehicle: the impact of driving pattern and climatic conditions on the environmental performance. T13-P04 University of Alberta | Activity | 2021-11-29 | |
Developing a framework to assess the long-term adoption of renewable energy technologies in the electric power sector: the effects of carbon price and economic incentivesLarge-scale deployment of renewable energy can play an immense role in transforming the global energy system and mitigating emissions. This paper describes the development of a novel framework called MArket Penetration ModeLing of Renewable Energy Technologies in Electric Power Sector (MAPLET-PS). MAPLET-PS assesses the impacts of policy measures such as carbon price and financial incentives on the adoption of renewable energy technologies. The framework was used to develop a case study for the electric power sector ofAlberta, a fossil-dominated province in Western Canada. The results show that implementing a carbon price on
fossil fuel electric power sources and incentives for renewable energy, along with the phase-out of coal-firedelectricity generation, can mitigate 29% of Alberta’s electricity sector 2020 GHG emissions by 2050 and reduce GHG emissions from 46.5 Mt of CO2 eq. in 2020 to 23.6 and 29.1 Mt of CO2 eq. per year in 2030 and2050, respectively, in Alberta. Moreover, these changes can increase the share of renewable energies from 12.5% in 2018 to 30% in 2050. These rates can be achieved by implementing a carbon price along with a 1000 $ incentive per kW new capacity development and 70 $ incentive per MWh electric power generation from renewable sources, from 2021 to 2025, primarily from wind turbines.T13-C01 University of Alberta | Publication | 2021-09-21 | Saeidreza Radpour, Eskinder Gemechu, "Ahiduzzaman M ", Kumar, A. |
The development of techno-economic models for the assessment of utility-scale electro-chemical battery storage systems
• A techno-economic assessment of battery storage systems was conducted.
• Data-intensive cost models were developed for five battery technologies.
• Four different stationary applications of batteries were evaluated.
• The levelized cost of storage decreases with increases in discharge duration.
• The levelized cost of storage is the lowest for bulk energy storage.T13-C01 University of Alberta | Publication | 2021-01-18 | "Md MustafizurRahman ", Olufemi Oni, Eskinder Gemechu, Kumar, A. |
Energy and environmental footprints of flywheels for utility-scale energy storage applicationsHighlights
• A bottom-up life cycle assessment model was developed for utility-scale flywheel energy storage systems.
• Net energy ratio and life cycle greenhouse gas (GHG) emissions were estimated.
• The operation phase is the most GHG-intensive.
• The net energy ratios of steel and composite flywheels are 2.5–3.5 and 2.7–3.8.
• The GHG emissions of steel and composite flywheels are 75–121 and 49–95 kg CO2eq/MWh.T13-C01 University of Alberta | Publication | 2021-11-01 | Md Mustafizur Rahman, Eskinder Gemechu, Olufemi Oni, Kumar, A. |
The development of techno-economic assessment models for hydrogen production via photocatalytic water splittingThe development of techno-economic assessment models for hydrogen production via photocatalytic water splittingT13-P04 University of Alberta | Publication | 2023-02-02 | Jayranjan Maurya, Eskinder Gemechu, Kumar, A. |
The development of techno-economic models for assessment of cost of energy storage for vehicle-to-grid applications in a cold climateThe development of techno-economic models for assessment of cost of energy storage for vehicle-to-grid applications in a cold climateT13-P04 University of Alberta | Publication | 2022-09-21 | M M Rahman, Eskinder Gemechu, Olufemi Oni, Kumar, A. |
A review of how life cycle assessment has been used to assess the environmental impacts of hydropower energyA review of how life cycle assessment has been used to assess the environmental impacts of hydropower energyT13-P04 University of Alberta | Publication | 2022-10-01 | |
Comparative life cycle assessment of an battery electric vehicle and a hydrogen fuel cell vehicleComparative life cycle assessment of an battery electric vehicle and a hydrogen fuel cell vehicle. NSERC/Cenovus/Alberta Innovates Associate Industrial Research Chair in Energy and Environmental Systems Engineering TAC MeetingT13-P04 University of Alberta | Activity | 2022-11-30 | |
Developing a framework to evaluate the life cycle energy and greenhouse gas emissions of space heating systems using zeolite 13X as an adsorbent materialThe wide use of fossil-based space heating systems results in significant greenhouse gas (GHG) emissions. Using solar energy for space heating can help reduce GHG emissions. However, solar energy generation is intermittent and needs to be stored for continuous supply. The zeolite 13× adsorbent heat storage system for space heating is a promising alternative. There is limited research on the life cycle GHG footprint of this type of adsorbent storage system. In this study, we developed a framework that integrates engineering design with life cycle assessment to evaluate the energy and emission performances of a zeolite 13×-based heating system charged by a solar air collector. A simulation model was developed for this adsorbent storage system. The life cycle GHG emissions of the residential heating system are estimated to be 0.1160 kg CO2 eq per kWh of the heat delivered over a 20-year lifetime. The operational phase contributes 74 % of the overall emissions because of the energy required by the humidifiers. The material production stage accounts for 25 %, mainly attributed to the upstream emissions in manufacturing photovoltaic thermal (PVT) air solar systems. The net energy ratio (NER), the ratio of energy output to fossil energy input, is 2.9. The continuous days without sunlight, the adsorbent vessel length-to-diameter ratio (L/D), and the pellet diameter of the zeolite 13× storage appear to be the parameters most sensitive to both emissions and NER. The uncertainty analysis shows emissions and NERs of the space heating system in the range of 97.2–152.3 g CO2 eq/kWh and 2.4–3.0, respectively. Compared with other alternative heating systems, the adsorbent system has better GHG performance. The research highlights the importance of selecting a suitable space heating system given the high influence of operational energy on the life cycle emissions and the range of electricity generation emissions in different provinces.T13-P04 University of Alberta | Publication | 2023-11-02 | T V Tran, Eskinder Gemechu, Olufemi Oni, "Carrier Y ", "Tezel H ", Kumar, A. |
Life cycle assessment of earth-abundant photocatalysts for enhanced photocatalytic hydrogen productionHydrogen (H2) can play a critical role in global greenhouse gas (GHG) mitigation. Photocatalytic water splitting using solar radiation is a promising H2 technology. Titanium dioxide (TiO2) and carbon nitride (g–C3N4)–based photocatalysts are the most widely used photocatalytic materials because of their activity and abundance. Several attempts have been made to improve the photocatalytic performance of these materials in terms of their activity level, life span, response to visible radiation, and stability. However, the environmental impacts of these modifications are often not included in existing studies. This research, therefore, develops a cradle-to-grave life cycle assessment (LCA) framework to evaluate and compare the GHG footprints of four alternative pathways: TiO2 nanorods and fluorine-doped carbon nitride quantum dots embedded with TiO2 (CNF: TNR/TiO2), g-C3N4, and g-C3N4/BiOI composite. Unlike most studies that focus only on certain stages such as laboratory-scale photocatalytic fabrication, this study includes utility-scale cell production, assembly, operation, and end of life to give a more accurate and precise environmental performance estimation. The results show that g-C3N4/BiOI has the lowest GHG footprint (0.38 kg CO2 eq per kg of H2) and CNF: TNR/TiO2 has the lowest energy payback time (0.4 years). In every pathway, energy use in material extraction processes makes up the largest GHG contribution, between 83% and 89%. Sensitivity and uncertainty analyses were conducted under the impact of various input parameters on the life cycle GHG emissions of hydrogen production. Photocatalytic water splitting is highly feasible for adaptation as a mainstream hydrogen production pathway in the future.
T13-P04 University of Alberta | Publication | 2023-05-31 | Jayranjan Maurya, Eskinder Gemechu, Kumar, A. |
Market penetration models for energy technologies: a new approach based on a reviewT13-M01 University of Alberta | Publication | 2020-02-19 | Saeidreza Radpour, "Deepak Paramashivan ", Kumar, A. |
An assessment of the Penetration of Low Carbon Technologies in the Energy Demand and Supply SectorsT13-M01 | Publication | 2021-01-26 | Saeidreza Radpour |
The development of a novel framework based on a review of market penetration models for energy technologies,The aim of this paper is to review and evaluate models used to assess the market penetration of energy technologies. While there are different models and tools, choosing the appropriate approach for a particular application is very challenging. In this paper, each model is reviewed and discussed extensively and a hierarchy diagram is developed to help choose a model. Market penetration models based on subjective estimation and market survey could be individual-dependent and not reliable for long-term forecasts. Cost estimation, diffusion, and econometric models offer more reliable results both for short- and long-term forecasts. Based on the review, a new combined model was developed and applied to a case study. The combined use of different market penetration models offers more accurate and robust results, as demonstrated in the case study.
T13-M01 University of Alberta | Publication | 2021-09-06 | Saeidreza Radpour, M A Mondal, "Paramashivan D ", Kumar, A. |
The development of process models to evaluate the performance of N-solv, eseieh, and sagd oil sandsT13-M01 University of Alberta | Activity | 2021-02-26 | |
Development of a techno-economic model for the assessment of the enhanced solvent extraction incorporating electromagnetic heating technologyT13-M01 University of Alberta | Activity | 2020-10-26 | |
Assessment of the solvent-electromagnetic heating-based bitumen extraction technology through techno-economic modellingThe steam-assisted gravity drainage is a
widely used extraction method for bitumen in a deep reservoir, however, it is greenhouse gas (GHG) emission intensive because of high fossil fuel consumption. There is a lot of interest in bitumen extraction technologies with a low GHG emissions footprint. Solvent-electromagnetic Heating (SEH) is an emerging technology that can lower GHG emissions in oil sands extraction. SEH uses an electromagnetic device and solvent to preheat and mobilize emulsion from the reservoir. SEH
eliminates the dependence on condensation heat and therefore the strict requirement of solvent purity. However, few studies have explored its techno-economic feasibility. Unlike studies found in the literature, this study presents a detailed techno-economic assessment, where plant size,
operating and economic parameters are evaluated to measure their impacts on the economics of SEH technology.T13-M01 University of Alberta | Publication | 2022-03-21 | |
Development of techno-economic models for assessment of solvent-based bitumen extraction technologyT13-M01 University of Alberta | Publication | 2021-12-22 | |
LCA of partial upgrading technologiesT13-M01 | Publication | 2021-09-23 | Isabel Toro |
Assessment of the effective solvent extraction incorporating electromagnetic heating technology through techno-economic modelingAssessment of the effective solvent extraction incorporating electromagnetic heating technology through techno-economic modelingT13-M01 University of Alberta | Publication | 2022-03-22 | |
The development of life cycle greenhouse gas emission assessment footprints of novel pathways for the solvent-assisted and solvent-electromagnetic heating oil sands extraction processesThe development of life cycle greenhouse gas emission assessment footprints of novel pathways for the solvent-assisted and solvent-electromagnetic heating oil sands extraction processesT13-M01 University of Alberta | Publication | 2017-01-01 | |
Techno-economic assessment of solvent-based bitumen extraction technologies including in-situ electromagnetic heating T13-M01 | Publication | 2021-09-23 | Isabel Toro |
Development of Biomass Feedstock Inventory for CanadaT13-M01 University of Alberta | Activity | 2021-05-10 | |
Biomass and waste feedstock inventory for CanadaT13-M01 University of Alberta | Activity | 2019-07-23 | |
Optimal siting of municipal solid waste to energy conversion facilities through a GIS-based frameworkT13-M01 University of Alberta | Activity | 2020-02-20 | Md Shahinoor Islam, Roshni Mary Sebastian, Kumar, A. |
Life cycle GHG footprints of MSW-based intermediate for production of renewable liquid fuels and its comparison with conventional utilization pathwaysT13-M01 University of Alberta | Activity | 2020-10-14 | |
Development of optimal location of biorefinery through integration of GIS and techno-economic modelsJuly 12-15, 2020. [Conference Presentation].T13-M01 University of Alberta | Activity | 2020-07-12 | "M Billal ", "M Islam ", Roshni Mary Sebastian, Kumar, A. |
Assessment of life cycle GHG emissions for sustainable municipal solid waste managementT13-M01 University of Alberta | Activity | 2020-05-11 | "Zhan H ", Roshni Mary Sebastian, M H Khan, Kumar, A. |
Development of biomass feedstock inventory for Canadian provinces.T01-F01 University of Alberta | Activity | 2021-05-11 | |
The development of an integrated GIS-based mixed-integer non-linear programming model for waste-to-energy systems in Western Canada. The 36th International Conference on Solid Waste Technology and Management. T01-F01 University of Alberta | Activity | 2021-07-12 | "Billal Mashum ", Roshni Mary Sebastian, Vinoj Kurian, Kumar, A. |
The development of a GIS-based framework to locate biomass and municipal solid waste collection points for an optimal waste conversion facilityAn integrated GIS-based tool was developed for optimally locating bioenergy facilities.
Waste and lignocellulosic biomass potential and distribution were assessed for Alberta.
A case study for Alberta‘s Industrial Heartland identified facility locations for two scenarios.
Ten optimal locations were identified across Alberta for bioconversion of waste and biomass feeds.T13-M01 University of Alberta | Publication | 2021-06-13 | Prashant Patel, Mahdi Vaezi, Roshni Mary Sebastian, Kumar, A. |
Optimal siting of municipal solid waste-to-energy conversion facilities using a GIS-based framework. T01-F01 University of Alberta | Activity | 2021-05-31 | "Islam Mohammad ", Roshni Mary Sebastian, Vinoj Kurian, Kumar, A. |
The development of a GIS-based framework for determining optimal locations for biorefineries in Canada. T13-M01 University of Alberta | Activity | 2021-06-28 | "Billal Mashum ", "Islam Mohammad ", Roshni Mary Sebastian, Kumar, A. |
The development of a framework through the integration of a geographical information system and the fuzzy analytic hierarchy process for the selection of optimal sites for the location of municipal solid waste-to-value-added facilities(Under review as of May 2023)
The development of a framework through the integration of a geographical information system and the fuzzy analytic hierarchy process for the selection of optimal sites for the location of municipal solid waste-to-value-added facilitiesT13-M01 University of Alberta | Publication | 2023-04-11 | Md Shahinoor Islam, Roshni Mary Sebastian, Vinoj Kurian, Kumar, A. |
A GIS-based optimization model for multi-feedstock biomass supply chain for multi-product generation through integrated biorefineries.A GIS-based optimization model for multi-feedstock biomass supply chain for multi-product generation through integrated biorefineries.T13-M01 University of Alberta | Activity | 2022-07-20 | M M Billal, "Dwivedi A ", Kumar, A., Roshni Mary Sebastian |
The development of an integrated GIS-based MINLP model with economies of scale for electricity generation from waste-to-energy facilities in Western Canada.The development of an integrated GIS-based MINLP model with economies of scale for electricity generation from waste-to-energy facilities in Western Canada.T13-M01 University of Alberta | Activity | 2022-05-25 | |
Development of a framework for forecasting residential and non-residential solid waste generation, disposal and diversion using machine learning approaches.Development of a framework for forecasting residential and non-residential solid waste generation, disposal and diversion using machine learning approaches.T13-M01 University of Alberta | Activity | 2022-05-12 | |
Prediction of the frictional behaviour for pipeline hydro transportation of agricultural residue using a neural network modelT01-P05 University of Alberta | Activity | 2020-11-23 | |
Artificial neural network model for predicting pressure drop in pipeline hydro transportation of agricultural residues.T13-M01 University of Alberta | Activity | 2021-04-26 | |
Scale up study on pipeline hydro-transportation of agricultural and forestry residuesT01-P05 University of Alberta | Activity | 2021-09-20 | |
A review of Canadian wood conversion technologies for the production of fuels and chemicalsCanada has 347 million ha of forest cover, contributing to the potential large availability of wood-based resources. Although Canada's forest sector contributed $23.7 billion to the national nominal gross domestic product (GDP) in 2019, the GDP contribution of the wood product manufacturing subsector shrank by 6%. To reposition the Canadian forest industry, new forest management practices and wood-based conversion technologies should be applied. In this context, the use of woody biomass in biorefineries to produce clean energy, fuels, and chemicals is becoming increasingly significant. There is a need to understand the current status and challenges of the wood-based biomass conversion technologies that have been and are being developed in Canada. This information will help decision-makers in formulating and implementing forest sector-related policies for a sustainable bioeconomy in Canada. This study is focused on a review of Canadian woody biomass conversion technologies. Our critical review identified considerable potential biomass conversion technologies specialized for woody feedstock, all in the Canadian setting. We focused on the prospects of revitalizing Canada's pulp and paper industry through the integration of pre-treatment processes and biochemical technologies. The thermochemical conversion pathway was identified as the dominant route for woody feedstock valorization. The review also identified pathways with the potential to diversify the existing product mix that generates products from wood streams, such as chemicals and biomaterials. Most of the biochemical and thermochemical research done in institutional and multi-institutional research collaborations from laboratory scale to industrial scale will boost the chances of the commercialization of a wood-based biorefinery in Canada.T13-P04 University of Alberta | Publication | 2023-07-06 | "Sreekumar A ", Vinoj Kurian, Kumar, A., Omex Mohan, "Mvolo C " |
Evaluation of particle size, shape and specific energy consumption during hammer milling of wheat straw and softwood residues.Evaluation of particle size, shape and specific energy consumption during hammer milling of wheat straw and softwood residues.T01-P05 University of Alberta | Activity | 2022-07-20 | Omex Mohan, Vinoj Kurian, Kumar, A., "Pradhan P " |
Scale up of pipeline hydro-transportation of agricultural and forestry residues.Scale up of pipeline hydro-transportation of agricultural and forestry residues.T01-P05 University of Alberta | Activity | 2022-05-12 | |
Investigation into the drag reduction behavior during pipeline hydro-transportation of forestry residues The potential of utilizing forestry residues for bioenergy is an attractive option for curbing greenhouse gas emissions and providing new opportunities for the forestry sector. However, the feedstock transportation using trucks to bioenergy facilities is challenging due to the remoteness of feedstock supply locations and the associated high cost. A viable alternative is to use pipelines to transport wood residues as slurry to the end conversion facilities. Even though wood chip slurry transportation has been previously studied with larger particle sizes, the mechanisms of slurry behavior with smaller particles must be further explored. The techno-economic attractiveness will be substantially improved if the forestry residue slurries behave similarly to agricultural residue slurries and show drag reduction behavior. Therefore, the primary goal of this research is to investigate the mechanisms of forestry residue slurry transport using a 2-inch pipeline system and to study the effect of bulk velocity, slurry concentration, and particle characteristics on slurry pressure drop. We measured pressure gradients for wood particle sizes ranging from 1.3 to 3.2 mm with saturated mass concentrations ranging from 5% to 35% and bulk velocities ranging from 0.5 to 5.0 m/s. The results show that drag reduction behavior exists in wood residue slurries with small particle sizes (<2.6 mm) and aspect ratios (4-6). Pressure drop was reduced by 22% when 1.3 mm residues were pumped at a bulk velocity of 3.4 m/s and a saturated mass concentration of 25% compared to water. The relationships between the slurry pressure drop and saturated mass concentration were estimated and used to determine the lower and higher limiting requirements for the drag-reducing regimes in the flow of wood slurry for a given particle size and bulk velocity. The findings of this study will be critical in determining the techno-economic feasibility of pipeline hydro-transportation of forest residues.T01-P05 University of Alberta | Activity | 2024-04-05 | |
Pelletization of Three Municipal Solid Waste Streams: Digestate, Source Separated Organics and Refuse Derived Fuel for Use in a BiorefineryWaste-to-energy conversion is one promising approach for sustainable waste management. Densified pelletized biomass meets the requirements to be used in such conversion processes. This study focuses on the thermo-chemical characterization, feasibility of pelletization, the effect of particle size and moisture content of three different waste streams: Source Separated Organics (SSO), Refuse Derived Fuel (RDF), and Digestate from the City of Edmonton. Three different milling sizes of 4, 8, and 12 mm, having a moisture content (MC) of 10 and 15% were processed through a die size of 6 mm. Both RDF and SSO could be pelletized. The produced RDF pellets had a calorific value of 21.49 MJ/Kg; the SSO pellets presented a variation between the winter and spring-summer seasons, having an HHV of 19.47 MJ/Kg in winter and 13.88MJ/Kg in spring-summer; this variation is linked with changes in the feedstock composition. The Digestate showed the lowest energetic content with 10.07 MJ/Kg. The ground RDF and SSO particle size directly affects the specific energy consumption and pelletization temperature but has an inverse relation with the process throughput. The moisture content directly affects the pelletization energy requirement for SSO, but the relation is inverse for RDF. The quality of the produced pellets was assessed; for the RDF, the maximum durability achieved was 98.23 %, while for SSO was 97.4 %; The maximum bulk density reached was 594 Kg/m3 for RDF and 730 Kg/m3 for SSO. The optimal pelletization variables were identified for potential scale-up and feedstock production in future thermochemical conversion research. The results of the study is critical for the utilization of the various components of MSW for the production of fuels and chemicals in a biorefinery and contribute to the concept of circular economy.T01-P05 | Activity | 2023-07-09 | Benjamin Mauricio Martinez Castellanos, Omex Mohan, Vinoj Kurian |
Development of techno-economic models for assessment of solvent-based bitumen extraction technologyThis study conducts a holistic comparative cost and life cycle GHG emissions’ footprint assessment of three natural gas-based blue hydrogen production technologies – steam
methane reforming (SMR), autothermal reforming (ATR), and natural gas decomposition (NGD) to address these research gaps. A hydrogen production plant capacity of 607 tonnes
per day was considered. For SMR, based on the percentage of carbon capture and capture points, we considered two scenarios, SMR-52% (indicates 52% carbon capture) and SMR-85%
(indicates 85% carbon capture). A scale factor was developed for each technology to understand the hydrogen production cost with a change in production plant size. The results
indicate that when uncertainty is considered, SMR-52% and ATR are economically preferable to NGD and SMR-85%.
SMR-52% could outperform ATR-CCS when the natural gas price decreases and the rate of return increases. SMR-85% is the least attractive pathway; however, it could outperform
NGD economically when CO2 transportation cost and natural gas price decrease. Hydrogen storage cost significantly impacts the hydrogen production cost. SMR-52%, SMR-85%, ATR-CCS,
and NGD-CCS have scale factors of 0.67, 0.68, 0.54, and 0.65, respectively. The hydrogen cost variation with capacity shows that operating SMR-52% and ATR-CCS above hydrogen
capacity of 200 tonnes/day is economically attractive. Blue hydrogen from autothermal reforming has the lowest life cycle GHG emissions of 3.91 kgCO2eq/kg H2, followed by
blue hydrogen from NGD (4.54 kgCO2eq/kg H2), SMR-85% (6.66 kgCO2eq/kg H2), and SMR-52% (8.20 kgCO2eq/kg H2). The findings of this study are useful for decision-making at
various levels.T13-M01 University of Alberta | Publication | 2022-01-24 | Olufemi Oni, "Karina Anaya ", Temitayo Pelumi Giwa, Giovanni DiLullo, Kumar, A. |
Comparative assessment of blue hydrogen from steam methane reforming, autothermal reforming, and natural gas decomposition technologies for natural gas-producing regionsInterest in blue hydrogen production technologies is growing. Some researchers have evaluated the environmental and/or economic feasibility of producing blue hydrogen, but a holistic assessment is still needed. Many aspects of hydrogen production have not been investigated. There is very limited information in the literature on the impact of plant size on production and the extent of carbon capture on the cost and life cycle greenhouse gas (GHG) emissions of blue hydrogen production through various production pathways. Detailed uncertainty and sensitivity analyses have not been included in most of the earlier studies. This study conducts a holistic comparative cost and life cycle GHG emissions’ footprint assessment of three natural gas-based blue hydrogen production technologies – steam methane reforming (SMR), autothermal reforming (ATR), and natural gas decomposition (NGD) to address these research gaps. A hydrogen production plant capacity of 607 tonnes per day was considered. For SMR, based on the percentage of carbon capture and capture points, we considered two scenarios, SMR-52% (indicates 52% carbon capture) and SMR-85% (indicates 85% carbon capture). A scale factor was developed for each technology to understand the hydrogen production cost with a change in production plant size. Hydrogen cost is 1.22, 1.23, 2.12, 1.69, 2.36, 1.66, and 2.55 $/kg H2 for SMR, ATR, NGD, SMR-52%, SMR-85%, ATR with carbon capture and sequestration (ATR-CCS), and NGD with carbon capture and sequestration (NGD-CCS), respectively. The results indicate that when uncertainty is considered, SMR-52% and ATR are economically preferable to NGD and SMR-85%. SMR-52% could outperform ATR-CCS when the natural gas price decreases and the rate of return increases. SMR-85% is the least attractive pathway; however, it could outperform NGD economically when CO2 transportation cost and natural gas price decrease. Hydrogen storage cost significantly impacts the hydrogen production cost. SMR-52%, SMR-85%, ATR-CCS, and NGD-CCS have scale factors of 0.67, 0.68, 0.54, and 0.65, respectively. The hydrogen cost variation with capacity shows that operating SMR-52% and ATR-CCS above hydrogen capacity of 200 tonnes/day is economically attractive. Blue hydrogen from autothermal reforming has the lowest life cycle GHG emissions of 3.91 kgCO2eq/kg H2, followed by blue hydrogen from NGD (4.54 kgCO2eq/kg H2), SMR-85% (6.66 kgCO2eq/kg H2), and SMR-52% (8.20 kgCO2eq/kg H2). The findings of this study are useful for decision-making at various levels.T13-M01 University of Alberta | Publication | 2022-02-15 | Olufemi Oni, Temitayo Pelumi Giwa, "Anaya, K ", Giovanni DiLullo, Kumar, A. |
Large-scale, long-distance land-based hydrogen transportation systems: a comparative techno-economic and greenhouse gas emission assessmentLarge-scale, long-distance land-based hydrogen transportation systems: a comparative techno-economic and greenhouse gas emission assessmentT13-M01 University of Alberta | Publication | 2022-09-07 | Giovanni DiLullo, Temitayo Pelumi Giwa, Tanveer Mehedi, Olufemi Oni, Kumar, A. |
Assessment of Integrated Multi-Product BiorefineriesT13-M01 | Publication | 2022-05-10 | Temitayo Pelumi Giwa |
Synergistic effect of water and co-solvents on the hydrothermal liquefaction of agricultural biomass to produce heavy oilHydrothermal Liquefaction (HTL) was performed on Alberta’s agricultural biomass, corn stover and wheat straw, at an operating temperature of 300°C, initial reactor pressure of 600 psi and zero min retention time. Effects of adding Co-solvents (Methanol, Ethanol, and 2-Propanol) on yield and quality of heavy oil has been studied. 2-Propanol exhibited to be a promising Co-solvent that has improved the quality of heavy oil. HTL of corn stover using water-2-propanol mixture produced heavy oil having oxygen content of 18.8 wt.%, Higher Heating Value (HHV) of 32.0 MJ/kg and Total Acid Number (TAN) value of 81.74 mg KOH/g oil. HTL of wheat straw using water-2-propanol mixture produced heavy oil showing an oxygen content of 17.99 wt.% and HHV of 32.86 MJ/kg.T01-P05 University of Alberta | Publication | 2022-01-06 | |
A Review of Hydrothermal Liquefaction of Biomass for Biofuels Production with a Special Focus on the Effect of Process Parameters, Co-Solvents, and Extraction SolventsHydrothermal liquefaction is one of the common thermochemical conversion methods
adapted to convert high-water content biomass feedstocks to biofuels and many other valuable
industrial chemicals. The hydrothermal process is broadly classified into carbonization, liquefaction,
and gasification with hydrothermal liquefaction conducted in the intermediate temperature range of
250–374 ◦C and pressure of 4–25 MPa. Due to the ease of adaptability, there has been considerable
research into the process on using various types of biomass feedstocks. Over the years, various
solvents and co-solvents have been used as mediums of conversion, to promote easy decomposition of the lignocellulosic components in biomass. The product separation process, to obtain the finalproducts, typically involves multiple extraction and evaporation steps, which greatly depend on the type of extractive solvents and process parameters. In general, the main aim of the hydrothermalprocess is to produce a primary product, such as bio-oil, biochar, gases, or industrial chemicals,such as adhesives, benzene, toluene, and xylene. All of the secondary products become part ofthe side streams. The optimum process parameters are obtained to improve the yield and quality of the primary products. A great deal of the process depends on understanding the underlined reaction chemistry during the process. Therefore, this article reviews the major works conducted in the field of hydrothermal liquefaction in order to understand the mechanism of lignocellulosic conversion, describing the concept of a batch and a continuous process with the most recent state-of-art technologies in the field. Further, the article provides detailed insight into the effects of various process parameters, co-solvents, and extraction solvents, and their effects on the products’ yield and quality. It also provides information about possible applications of products obtained through liquefaction. Lastly, it addresses gaps in research and provides suggestions for future studies.T01-P05 University of Alberta | Publication | 2021-08-11 | |
Hydrothermal liquefaction of lignocellulosic biomass using water and hydrogen-donor solvent mixtures to produce energy-dense heavy oilT01-P05 | Publication | 2021-01-01 | Snehlata Das |
Development of a techno-economic model for the assessment of cost of bitumen using steam-solvent extraction technology.Development of a techno-economic model for the assessment of cost of bitumen using steam-solvent extraction technology.T13-P04, T13-M01 University of Alberta | Activity | 2022-10-26 | |
A comprehensive assessment of the integration of solvent and steam for the extraction of bitumen through the development of novel process modelsSolvent-steam bitumen extraction technology has the potential to reduce energy consumption and greenhouse gas (GHG) emissions. It is based on gravity drainage, wherein a steam and vaporized solvent mixture is used to extract bitumen from a reservoir. This can reduce the environmental impact compared with processes that use only steam for bitumen extraction [i.e., steam-assisted gravity drainage (SAGD)]. No techno-economic analysis of solvent-steam extraction has been made available in the public domain. In this study, a process simulation model was developed to assess costs. A capacity of 25,000 B/D of bitumen was considered with hexane as the solvent. Sensitivity and uncertainty analyses were conducted to assess how the supply cost of bitumen produced with diluent (dilbit) changes with changes in input parameters. The supply cost for the base case scenario is 55.5 CAD/bbl at a 10% internal rate of return (IRR). The scale factor was estimated to be 0.80, which suggests that oil production will be economically viable on a large scale. Capital cost, solvent price, and transportation and blending cost affect the supply cost. The most probable supply cost range is 53.0–65.4 CAD/bbl at a 90% confidence interval. The results also indicate that dilbit supply costs from the solvent-steam process are economically attractive compared with the current oil price.T13-P04 University of Alberta | Publication | 2024-01-19 | |
Planning for net-zero GHG emissions by 2050: Moving from technical feasibility assessments to actionable analysisResearchers with the Intergovernmental Panel on Climate Change (IPCC) predict that the net flux of anthropogenic greenhouse gas (GHG) emissions must reach zero by 2050 to limit global warming to 1.5°C within this century. This target requires that all GHG emissions resulting from human activity are offset by equal levels of natural or technological carbon uptake, meaning that action towards net-zero GHG emissions may involve measures aiming to minimize GHG sources or maximize GHG sinks. Achieving net-zero greenhouse gas (GHG) emissions may only be possible through the rapid deployment of new technologies at an unprecedented rate, requiring policymakers to develop creative policy instruments to facilitate collaborative action across sector boundaries. This research describes a novel approach to planning for and assessing action towards net-zero GHG emissions based on bottom-up, accounting-based energy modelling techniques.
The first part of this research develops a framework for assessing the contribution potential of energy-efficiency measures towards economy-wide net-zero emission targets. The framework uses a bottom-up energy model spanning the agriculture, cement, chemicals, commercial and institutional, iron and steel, oil extraction, petroleum refining, and residential sectors, together accounting for over 75% of annual energy demand in the case study region of Alberta, Canada. 81 energy-efficiency improvements were identified for these sectors which, by 2050, may mitigate 8% of regional annual GHG emissions relative to a baseline in which shares and efficiencies of existing technologies are held constant. Considering the interaction effects between simultaneously applied measures, measures representing 80% of the identified cumulative mitigation potential may be implemented at negative cost. The assessed energy-efficiency measures represent cost-effective and readily deployable GHG mitigation strategies for most major economic sectors, but together only account for a small fraction of the GHG mitigation required for complete energy system decarbonization in the assessed region. This framework offers value to policymakers developing actionable policy and milestone targets towards long-term emissions-reduction goals.
This framework was expanded to assess technology-specific measures toward achieving net-zero GHG emissions within a multi-regional multi-sectoral economy, where the effects, costs, and benefits of various GHG mitigation measures could be assessed incrementally. A portfolio of 184 measures was developed. Measures were categorized according to practical type and technological readiness and their maximum technical GHG mitigation potential was evaluated. These measures are applicable in the cement, chemicals, commercial and institutional, iron and steel, oil sands, petroleum refining, pulp and paper, residential, and transportation sectors. The effects of these measures were compared to a static reference scenario and a business-as-usual scenario reflecting current policy. Together, the assessed measures represent an extensive portfolio of commercially available opportunities for energy efficiency improvement, fuel switching, and carbon capture and storage. Under current policy, these measures may mitigate 33% of baseline GHG emissions by 2050 and represent significant economic cost savings. If implemented to their maximum extent, they may reduce baseline GHG emissions by 50% by 2050 at additional economic costs. The results indicate that there is a clear gap between national GHG reduction ambitions and available solutions and highlight the need for more transparent and specific energy systems models for decarbonization assessment.
This research ultimately highlights the gap between currently available GHG reduction measures and complete decarbonization; achieving net-zero GHG emissions will only be possible through a complete transformation of entire energy systems and economies. Existing assessment frameworks that represent net-zero as a system-wide constraint and model hypothetical technologies alongside proven measures often fail to communicate the magnitude of change implied by this target.
T13-P01 | Publication | 2023-06-30 | Luke Sperry |
Kumar M, Oyedun AO, Kumar A. A review on the current status of various hydrothermal technologies on biomass feedstock, Renewable & Sustainable Energy Reviews, 2018, 81 (2): 1742-1770.Journal PaperT01-P05 University of Alberta | Publication | 2018-04-28 | |
Large scale pipeline hydrotransport of biomass feedstock to bio-based energy facilitiesVaezi M*, Kumar A. Large scale pipeline hydrotransport of biomass feedstock to bio-based energy facilities, presented at the SPARK 2017 Conference, Nov. 6-8, 2017, Edmonton, AB. T01-P05 University of Alberta | Activity | 2017-11-06 | |
Measuring agricultural residue and woodchips biomass slurry flows critical velocity in pipelines using high-frequency impedancemetry approachVaezi M*, Kumar A. Measuring agricultural residue and woodchips biomass slurry flows critical velocity in pipelines using high-frequency impedancemetry approach, presented at the 67th Canadian Chemical Engineering Conference, Oct. 22-25, 2017, Edmonton, AB. T01-P05 University of Alberta | Activity | 2017-10-22 | |
Comparative assessment of pipeline hydro-transport of biomass feedstock – an overview of 8 years experimental and techno-economic studiesVaezi M*, Kumar A. Comparative assessment of pipeline hydro-transport of biomass feedstock – an overview of 8 years experimental and techno-economic studies, presented at the ASABE 2017 Annual International Meeting, July 16-19, 2017, Spokane, Washington.T01-P05 University of Alberta | Activity | 2017-07-16 | |
Economic and environmental impact assessments of Alberta’s oil sands with the Global Change Assessment ModelT13-P02 University of Alberta | Activity | 2018-10-04 | |
What is the production cost of renewable diesel from woody biomass and agricultural residue based on experimentation? A comparative assessmentT13-M01 University of Alberta | Publication | 2019-04-23 | |
A comparative analysis of hydrogen production from the thermochemical conversion of algal biomassT13-M01 University of Alberta | Publication | 2019-04-23 | |
The development of a process simulation model for energy consumption and greenhouse gas emissions of a vapor solvent-based oil sands extraction and recovery processT13-M01 University of Alberta | Publication | 2019-02-19 | Mohammad Ikthair Hossain Soiket, Olufemi Oni, Kumar, A. |
Assessment of long-term energy efficiency improvement and greenhouse gas emissions mitigation options for the cement industryT13-M01 University of Alberta | Publication | 2019-01-04 | Ali Talaei, "David Pier ", "Aishwarya Iyer ", "Md. Ahiduzzaman ", Kumar, A. |
Application of high-frequency impedancemetry approach in measuring the critical velocities of biomass and sand slurry flows in pipelinesT01-P05 University of Alberta | Publication | 2018-10-17 | |
Predicting the biomass conversion performance in a fluidized bed reactor using an isoconversional model-free methodT13-M01 University of Alberta | Publication | 2019-01-25 | |
A techno-economic assessment of renewable diesel and gasoline production from aspen hardwoodT13-M01 University of Alberta | Publication | 2019-06-08 | |
Techno-economic assessment of introducing intermediate pyrolysis in small community landfills across AlbertaT01-F01 University of Alberta | Activity | 2019-07-14 | Wasel-ur Rahman, Madhumita Patel, Vinoj Kurian, Kumar, A., "Andreas Hornung " |
Biobattery concept: Decentralized production of fuel from forest biomass, agriculture residue and municipal solid wasteT01-F01, T02-P06 University of Alberta, Carleton Unviersity | Activity | 2018-03-14 | Adetoyese Oyedun, Vinoj Kurian, Wasel-ur Rahman, Manjot Gill, Kumar, A., Gupta, R., Kostiuk, L., "Andreas Hornung " |
Decentralized use of forest biomass, agricultural residue, and municipal solid waste through the biobattery conceptT01-F01, T02-P06 University of Alberta, Carleton Unviersity | Activity | 2017-11-06 | |
Enhanced biomethane recovery from fat, oil, and grease through co-digestion with food waste and addition of conductive materialsT01-Q01 University of Alberta | Publication | 2019-12-01 | Bappi Chowdhury, Long Lin, Bipro Dhar, Mohammad Nazrul Islam, Daryl McCartney, Kumar, A. |
Assessment of the impacts of process-level energy efficiency improvement on greenhouse gas mitigation potential in the petroleum refining sectorT13-M01 University of Alberta | Publication | 2020-02-19 | Ali Talaei, Olufemi Oni, "Mohammed Ahiduzzaman ", Pritam Sankar Roychaudhuri, "Jeff Rutherford ", Kumar, A. |
A comparative techno-economic analysis of algal thermochemical conversion technologies for diluent productionT13-M01 University of Alberta | Publication | 2020-02-19 | |
Spatial distribution of usable biomass feedstock and technical bioenergy potentialT01-T01 University of Alberta | Publication | 2020-02-19 | "Jingying Fu ", "Yaoyu Nie ", "Shiyan Chang ", "Wenjia Cai ", "Can Wang ", "Jingxuan Hui ", "Le Yu ", "Wanbin Zhu ", "Guorui Huang ", Kumar, A., "Weichao Guo ", "Qun Ding " |
The development of a cost model for two supply chain networks of the decentralized pyrolysis system to produce bio-oilT01-P05 University of Alberta | Publication | 2020-02-19 | Madhumita Patel, Adetoyese Oyedun, Kumar, A., John Doucette |
Comparative techno-economic assessment of producing pure CO2 from flue gases produced from fossil fuel plants using amine and ammonia separationT13-M01 University of Alberta | Publication | 2020-02-19 | |
Hydrothermal liquefaction of lignocellulosic biomass feedstock to produce biofuels: parametric study and products characterizationT01-P05 University of Alberta | Publication | 2020-02-19 | |
A review of the process model and parametric study for the hydrothermal gasification of algal biomassT13-M01 University of Alberta | Publication | 2020-02-19 | |
Large-scale hydrogen production from alternative sources for hydrogen economy. T13-M01 University of Alberta | Activity | 2019-08-15 | |
Development of techno-economic models for the assessment of utility-scale electro-chemical energy storage technologiesT13-M01 University of Alberta | Activity | 2019-07-23 | |
Prospects of renewable natural gas in North America: A review of feedstock availability, conversion technology, economic viability and emissions reduction potential.July 14-17, 2019. [Conference Presentation]T13-M01 University of Alberta | Activity | 2019-07-14 | |
Parametric study of hydrothermal treatment of biomass to produce biofuelsJune 16-21, 2019. [Conference Presentation]T01-P05 University of Alberta | Activity | 2019-06-16 | Ankit Mathanker, Deepak Pudasainee, Kumar, A. |
Integration of large-scale biomass supply through pipeline for scale-up of biomass processingDate: May 30-31, 2019. [Conference Presentation]T01-P05 University of Alberta | Activity | 2019-05-30 | |
Hydrothermal treatment of biomass to produce biofuelsT01-P05 University of Alberta | Activity | 2019-05-07 | |
Conversion of biomass and municipal solid waste into renewable jet fuelT01-F01 University of Alberta | Activity | 2019-05-07 | |
Assessment of environmental and economic footprints of energy storage systems.T13-M01 University of Alberta | Activity | 2020-02-20 | |
Blending blue hydrogen with natural gas for direct consumption: Examining the effect of hydrogen concentration on transportation and well-to-combustion greenhouse gas emissionsT13-M01 University of Alberta | Publication | 2021-05-14 | |
Potential for energy efficiency improvement and greenhouse gas mitigation from Canada’s iron and steel industryT13-M01 University of Alberta | Publication | 2020-07-17 | |
Retrofitting coal-fired power plants with biomass co-firing and CCS for net zero carbon emission: A plant-by-plant assessment based on GIS-LCA frameworkT01-T01 University of Alberta | Publication | 2020-09-30 | "Rui Wang ", "Shiyan Chang ", "Xueqin Cui ", "Jin Li ", "Linwei Ma ", Kumar, A., "Yaoyu Nie ", "Wenjia Cai " |
A parametric study through the modeling of hydrothermal gasification for hydrogen production from algal biomassHydrothermal gasification (HTG) is applicable to high moisture content biomass feedstock such as wet microalgae. The key interests of this thermochemical processing are its ability to use whole algae instead of simply lipid extracts and to use a wide range of algal feedstocks. It employs water in the form of a reaction medium to disintegrate biomass into hydrogen gas. The products' composition and yields are a function of process parameters, namely feed concentration, pressure, and temperature. There is very limited literature available on model development to understand the impacts of various input parameters on the products of HTG. This study presents the development of a detailed process model for HTG and the illustration of process parameters on the gas product yields. The approach includes developing the system model, identifying the key process parameters in the reactor setup that affect syngas yield, and understanding the overall process in terms of final product yield. A simulation of hydrothermal gasification based on thermodynamic equilibrium is studied. Based on the developed process model about 52.1 t/day of hydrogen can be produced from 500 t/day of wet algal biomass. This shows the potential of large-scale hydrogen production through this process for the hydrogen economy. The results from this study could be used by the gas processing industry and policymakers to determine the most feasible means of converting biomass-based resources into gaseous fuels.T01-P05 University of Alberta | Publication | 2021-04-01 | |
Rheology of fiber suspension flows in pipeline hydro-transport of biomass feedstockT01-P05 University of Alberta | Publication | 2020-12-16 | Ali Faghania Faghania Ali, "Samya Sen ", Mahdi Vaezi, Kumar, A. |
Techno-economic assessment of a biomass-MSW integrated waste-to-value-added facilityT13-M01 University of Alberta | Publication | 2020-10-01 | |
EU-Canada cooperation on climate changeT13-M01 University of Alberta | Activity | 2020-11-23 | |
Development of a techno-economic model for the assessment of chemical looping combustion to produce hydrogenT13-M01 University of Alberta | Activity | 2020-10-26 | |
Techno-economic assessment of vanadium recovery from bitumen spent catalystT13-M01 University of Alberta | Activity | 2020-10-26 | |
Blending blue hydrogen with natural gas for direct consumption: Examining the effect of hydrogen concentration on transportation and well-to-combustion greenhouse gas emissionsT13-M01 University of Alberta | Activity | 2020-10-26 | |
Greenhouse gas emission implications of blending blue hydrogen in natural gas pipelines for large-scale utilizationT13-M01 University of Alberta | Activity | 2020-10-14 | |
Development of techno-economic models for assessment of heavy metal production from by-products produced in bitumen value chainT13-M01 University of Alberta | Activity | 2020-10-14 | |
Integration of scale and optimal location for development of commercial scale biorefinery.T13-M01 University of Alberta | Activity | 2020-10-14 | |
Large scale hydrogen production from alternative sources: a comprehensive assessmentT13-M01 University of Alberta | Activity | 2020-07-13 | |
An Integrated GIS-based framework for optimal siting of biorefineriesT13-M01 University of Alberta | Activity | 2020-07-06 | "M Islam ", "Rhosni Sebastian ", Vinoj Kurian, Kumar, A. |
Future Energy system overviewT13-M01 University of Alberta | Activity | 2020-06-23 | |
Techno-economic assessment of Vanadium recovery from spent catalysts from the upgrading and refining of bitumenT13-M01 University of Alberta | Activity | 2020-05-11 | |
Thermo-catalytic reforming of Alberta-based biomass feedstock to produce biofuelsT01-F01 University of Alberta | Publication | 2021-09-15 | |
Assessment of biomass resource in China and Canada and the potential for bilateral biomass trade for co-firingT01-T01 University of Alberta | Activity | 2018-10-17 | Vinoj Kurian, "Weng Y ", A O Oyedun, M S Islam, "Cai W ", "Chang S ", "Linwei M ", Kumar, A., Davies, E. |
Current availability assessment of biomass resource in China and Canada and the potential for bilateral biomass trade to develop biomass co-firing in Chinese coal power plantsT01-T01 University of Alberta | Activity | 2019-09-25 | "Rui Wang ", "Wenjia Cai ", Kumar, A., "Linwei Ma ", "Shiyan Chang ", "Yaoyu Nie " |
Interview on the biobatteryT01-F01 University of Alberta | Activity | 2017-10-28 | |
Award for Research Excellence2020 APEGA Summit Award for Research Excellence is awarded to a member by the Association of Professional Engineers and Geoscientists of Alberta (APEGA) in recognition of conducting innovative research in engineering or geoscience that has been successfully applied to improve economic and social well-being, 2020.T13-M01 University of Alberta | Award | 2020-05-29 | |
Intermediate Pyrolysis of Boreal Forest Residues for Production of Biofuels. T01-F01 University of Alberta | Activity | 2021-07-12 | |
Using proxy models and adaptive sampling to integrate complex engineering models into life cycle assessments of energy systemsT13-M01 University of Alberta | Activity | 2021-12-07 | |
Assessment of options for reduction of energy and GHG emissions for pulp and paper sector. T13-M01 University of Alberta | Activity | 2022-02-07 | |
Thermo-catalytic reforming of Canadian agricultural residues to produce biofuelsT01-F01 University of Alberta | Activity | 2021-07-05 | Bijay Dhakal, Vinoj Kurian, Ankit Gupta, Kumar, A. |
Integrated assessment of environmental footprints for energy scenarios. Second annual progress report submitted to Future Energy Systems T13-P01 University of Alberta | Publication | 2021-05-03 | |
Assessment of technologies developed under Future Energy SystemsT13-P04 University of Alberta | Publication | 2021-05-03 | |
Hydrothermal torrefaction of high moisture content biomassT01-P05 University of Alberta | Publication | 2021-05-03 | |
Life cycle assessment of energy system transitionsT13-C01 University of Alberta | Publication | 2021-05-03 | |
Decentralized production of fuel from forest and agricultural wasteT01-F01 University of Alberta | Publication | 2021-05-03 | |
NSERC/Cenovus/Alberta Innovates Associate Industrial Chair Program in Energy and Environmental Systems Engineering. T13-M02 University of Alberta | Publication | 2021-05-03 | |
The Upgrading of Bio-Oil via HydrodeoxygenationT13-M01 University of Alberta | Publication | 2019-12-13 | Adetoyese Oyedun, Madhumita Patel, Mayank Kumar, Kumar, A. |
Investigating the techno-economic and environmental performance of chemical looping technology for hydrogen productionInvestigating the techno-economic and environmental performance of chemical looping technology for hydrogen productionT13-P04, T13-M01 University of Alberta | Publication | 2023-01-19 | |
The development of a techno-economic model for assessment of vanadium recovery from bitumen upgrading spent catalystThe development of a techno-economic model for assessment of vanadium recovery from bitumen upgrading spent catalystT13-M01 University of Alberta | Publication | 2022-05-31 | |
Estimation of life cycle GHG emissions of asphaltene-based carbon fibers derived from oil sands bitumenEstimation of life cycle GHG emissions of asphaltene-based carbon fibers derived from oil sands bitumenT13-M01 University of Alberta | Publication | 2017-01-01 | |
Investigating the techno-economic performance of chemical looping technology for hydrogen productionInvestigating the techno-economic performance of chemical looping technology for hydrogen production. Carbon Capture Canada ConferenceT13-M01 University of Alberta | Activity | 2022-09-22 | |
Greenhouse gas emissions and cost footprints of asphaltene-based carbon fibers derived from oil sands bitumenT13-M01 University of Alberta | Activity | 2022-10-26 | |
Development of a valorization framework for biogenic CO2 emissions from kraft pulp mills.T01-P05 University of Alberta | Activity | 2022-10-26 | |
LCA/TEA of biomass with carbon removal and storage (BiCRS)Amit Kumar - Invited expert panelist.
LCA/TEA of biomass with carbon removal and storage (BiCRS)T13-M01 University of Alberta | Activity | 2022-07-28 | |
Analyzing the techno-economic aspects of co-processing fast pyrolysis bio-oil with conventional vacuum gas oil for the production of liquid fuels.Analyzing the techno-economic aspects of co-processing fast pyrolysis bio-oil with conventional vacuum gas oil for the production of liquid fuels.T01-P05 University of Alberta | Activity | 2022-07-20 | "Sreekumar A ", Olufemi Oni, Vinoj Kurian, Kumar, A. |
Hydrogen for decarbonization of aviation sector.Hydrogen for decarbonization of aviation sector.T13-M01 University of Alberta | Activity | 2022-05-26 | |
Life cycle GHG emissions assessment of vanadium recovery from spent catalysts from bitumen upgraders.Life cycle GHG emissions assessment of vanadium recovery from spent catalysts from bitumen upgraders.T13-M01 University of Alberta | Activity | 2022-05-25 | |
Techno-economic assessment of co-processing of fast pyrolysis bio-oil with fossil fuel derived vacuum gas oilTechno-economic assessment of co-processing of fast pyrolysis bio-oil with fossil fuel derived vacuum gas oilT01-P05 University of Alberta | Activity | 2022-05-12 | "Sreekumar A ", Olufemi Oni, Vinoj Kurian, Kumar, A. |